Diagnostics and troubleshooting
Leuze electronic
RSL 410
80
P0413
Safety configuration is not compatible:
unknown inputs SE1 and SE2.
Swap out the safety sensor or change the
configuration. The type of safety sensor
must be the same as the type stored in the
connection unit or in the
Sensor Studio
soft
-
ware.
P0414
Safety configuration is not compatible:
unknown EDM inputs.
Swap out the safety sensor or change the
configuration. The type of safety sensor
must be the same as the type stored in the
connection unit or in the
Sensor Studio
soft
-
ware.
P0415
Safety configuration is not compatible:
unknown field pair monitoring mode.
Swap out the safety sensor or change the
configuration. The type of safety sensor
must be the same as the type stored in the
connection unit or in the
Sensor Studio
soft
-
ware.
P0416
Safety configuration is not compatible:
unknown field pair monitoring parameters.
Swap out the safety sensor or change the
configuration. The type of safety sensor
must be the same as the type stored in the
connection unit or in the
Sensor Studio
soft
-
ware.
P0417
Safety configuration is not compatible:
unknown field pair monitoring mode.
Swap out the safety sensor or change the
configuration. The type of safety sensor
must be the same as the type stored in the
connection unit or in the
Sensor Studio
soft
-
ware.
P0419
Safety configuration is not compatible:
unknown monitoring parameter for the
changeover order.
Swap out the safety sensor or change the
configuration. The type of safety sensor
must be the same as the type stored in the
connection unit or in the
Sensor Studio
soft
-
ware.
P0420
Safety configuration is not compatible:
unknown monitoring mode of the field pair
changeover.
Swap out the safety sensor or change the
configuration. The type of safety sensor
must be the same as the type stored in the
connection unit or in the
Sensor Studio
soft
-
ware.
P0421
Safety configuration is not compatible:
unknown parameter for field pair changeover
monitoring.
Swap out the safety sensor or change the
configuration. The type of safety sensor
must be the same as the type stored in the
connection unit or in the
Sensor Studio
soft
-
ware.
P0422
Safety configuration is not compatible:
unknown field pair selection mode.
Swap out the safety sensor or change the
configuration. The type of safety sensor
must be the same as the type stored in the
connection unit or in the
Sensor Studio
soft
-
ware.
P0423
Safety configuration is not compatible:
unknown field pair selection parameter.
Swap out the safety sensor or change the
configuration. The type of safety sensor
must be the same as the type stored in the
connection unit or in the
Sensor Studio
soft
-
ware.
Diagnos
-
tic ID
Diagnostics message
Measure
