Configuration and diagnostic software Sensor Studio
Leuze electronic
RSL 410
27
Information on the monitored signals can be found in the information area and in the online help. Select
the Help menu item in the menu [?].
Sensor display
Activation of the safety sensor alphanumerical display.
Information on the display options can be found in the information area and in the online help. Select the
Help menu item in the menu [?].
Passwords
CHANGE PASSWORD
Define individual passwords for the access levels
Engineer
and
Expert
. These passwords replace the
default passwords set by the manufacturer.
The password is case-sensitive (i.e. a distinction is made between upper-case and lower-case letters).
One-time password
Prerequisites:
• The software is connected to the safety sensor.
Generate a one-time password.
Note down the generated one-time password.
Send the one-time password to the Leuze electronic customer service for confirmation (see chapter 14
"Service and support").
The device can now be switched off and the connection can be terminated.
Enter the confirmed password and create a new password.
Optics cover
• Monitoring of optics cover
• Dialog box for calibrating a replacement optics cover
Field editor display options
Display settings for the field editor when defining protective/warning fields.
• CONTOUR ALIGNMENT
• COORDINATE DISPLAY
• EDITOR BEHAVIOR
Information on the display options can be found in the information area and in the online help. Select the
Help menu item in the menu [?].
If a user has forgotten his password for login at the safety sensor or has repeatedly entered the
password incorrectly, he cannot log in at the safety sensor. The CHANGE PASSWORD function
is therefore not available.
To reset the password, a user must generate a one-time password and have it confirmed by the
manufacturer.
