Maintenance, repair, decommissioning and disposal
Leuze electronic
MSI 100/200
100
13 Maintenance, repair, decommissioning and disposal
13.1
Maintenance
The modules of the MSI 100/200 system are maintenance-free. Depending on the application
and the connected peripherals, the function of the peripheral devices and the safety chain may
need to be tested periodically.
Service the connected peripheral devices (e.g., light barriers) acc. to manufacturer's specifi-
cations.
The mission time and the proof test interval at high or low demand rate for the modules of the
MSI 100/200 system can be found in the technical data.
See "Technical data and ordering data" on page 101.
13.2
Repair
Repair work or changes by the user to the module are prohibited. The housing must not be
opened. If the housing is opened, the function of the MSI 100/200 modules is no longer guar-
anteed.
In case of failure, send the module to Leuze electronic or immediately contact
Leuze electronicand request a member of service staff.
13.3
Decommissioning and disposal
Decommission according to the requirements of the machine or system manufacturer.
When decommissioning the MSI 100/200 system or parts of the system, handle the used mod-
ules as follows:
Further use of the module
Measure
The modules are still used as intended.
Observe requirements on storage and
transport according to the technical data:
see chapter 14 "Technical data and order-
ing data" on page 101.
Modules are no longer used.
Dispose of the modules in accordance with
environmental regulations. Ensure that the
modules cannot be used again.
