Letatwin LM390, User Manual

Page: 25 / 75

Fel! Använd fliken Start om du vill tillämpa
見出し
1 för texten som ska visas här.
25
4.
BASIC OPERATION
1. Open the cassette cover and load the consumables to use. (See 3: LOADING THE
CONSUMABLES) Then, close the cassette cover and turn the power on.
2. [ PRINTED MATERIAL setting screen ] appears.
Press ▲/▼/ / key to select “
PRINTED
MATERIAL ” and “ SIZE .”
Press ENTER , then [ INPUT screen ] appears.
Note:
● When changing the material, press SHIFT → Esc (P.MATERIAL).
Then [ PRINTED MATERIAL setting screen ] appears.
After changing the kind of material (“TUBE” to “TAPE” or “TAPE” to “TUBE”),
[PITCH LENGTH setting screen] appears. Input the desired pitch length and
then press ENTER .
● When changing the material with pressing SHIFT → Esc (P.MATERIAL), the
“ CHARACTER SIZE ” is automatically changed to “ AUTO ”.
However, when the selected printed material is TAPE, “ CHARACTER SIZE ” is not
changed to “ AUTO ”.
● If any document is remained in the [
INPUT
screen ] before turning off the power, the right
screen appears when turning the power on next
time.
Press ▲/▼ key to select “
INITIALIZE ” or
“ CONTINUE .”
▲
/
▼
key: Move the cursor between “ MATERIAL ” and “ SIZE ”
/ key: “ MATERIAL ”
･･･
Select from “ TAPE ”, “ GENERIC TUBE ” , “ SHRINKABLE
TUBE ”, “ NON PVC TUBE ” or “ MAX TUBE ”
“ SIZE ”
････････
GENERIC TUBE: Select from “ 2.5 ”,“ 3.2 ”,” 3.6 ”,” 4.2 ”,” 5.2 ”, ” 5.5 ” or “ 6.5 ”.
MAX TUBE: Select from “ 3.2 ”,” 3.6 ”,” 4.2 ”, ” 5.2 ” or “ 6.4 ”.
SHIRNKABLE TUBE: Select from “ 2.5 ”,“ 3.2 ”,” 3.6 ”,” 4.2 ”,” 5.2 ”, ” 5.5 ” or “ 6.5 ”.
NON PVC TUBE (“PVC free” TUBE): Select from “ 3.2 ”,” 3.6 ”,” 4.2 ” or ” 5.2. ”
TAPE: Select from “ 5 ”,” 9 ” or “ 12 .”
Ｆ Ｉ Ｌ Ｅ Ｂ Ｅ Ｉ Ｎ Ｇ Ｉ Ｎ Ｐ Ｕ Ｔ
Ｉ Ｎ Ｉ Ｔ Ｉ Ａ Ｌ Ｉ Ｚ Ｅ
Ｃ Ｏ Ｎ Ｔ Ｉ Ｎ Ｕ Ｅ
［ＰＲＩＮＴＥＤ ＭＡＴＥＲＩＡＬ］
ＭＡＴＥＲＩＡＬ＝
ＭＡＸ ＴＵＢＥ
ＳＩＺＥ＝３．２