Letatwin LM390 Page 60 User Manual Download

Page: 60 / 75

Fel! Använd fliken Start om du vill tillämpa

見出し

1 för texten som ska visas här.

8-1-2

INSTALLING THE PRINTER DRIVER

1. Prior to installing the printer driver, terminate other application software and resident-type software.

Note: If the previous version of “LETATWIN PC EDITOR” and/or the driver has been

installed to the computer already, make sure to uninstall them first, by using the Setup

menu of the “LETATWIN PC EDITOR” CD-ROM. The uninstallation of the software and the

driver are separately processed.

2. Insert the included CD-ROM into the computer.

3. Connect the LM-390A/PC to the computer with USB cable, then turn it on. Select printed material.

4. Press

OPTION .

The

[PC connection / OPTION setting screen]

appears.

5. Press ▲/▼ key to select “

DIRECT PRINTING

FROM PC

6. Press ENTER.

7. Press

key to select

“YES”.

8. Press ENTER.

9. The following message is displayed, which shows

the machine is ready to receive data from PC.

ＤＡＴＡＦＩＬＥＴＲＡＮＳＦＥＲ

ＦＲＯＭＰＣ

ＤＩＲＥＣＴ   ＰＲＩＮＴＩＮＧ
                      ＦＲＯＭ   ＰＣ
ＯＰＴＩＯＮ

ＤＡＴＡＦＩＬＥＴＲＡＮＳＦＥＲ

ＦＲＯＭＰＣ

ＤＩＲＥＣＴＰＲＩＮＴＩＮＧ
ＦＲＯＭＰＣ

ＯＰＴＩＯＮ

ＤＥＬＥＴＥ

ＩＮＰＵＴＴＩＮＧＦＩＬＥ

ＹＥＳ

ＮＯ

［ＰＣＣＯＮＮＥＣＴＩＯＮ］

ＲＥＡＤＹＴＯＲＥＣＥＩＶＥ

ＤＡＴＡ

Summary of Contents for LM390












































































Search results

Summary of Contents for LM390

Reviews:

Related manuals for LM390

Brands by name

Popular brands

Letatwin LM390, User Manual

Search results

Summary of Contents for LM390

Reviews:

Related manuals for LM390

Brands by name

Popular brands