Letatwin LM390 User Manual Download Page 4

Page: 4 / 75

Fel! Använd fliken Start om du vill tillämpa

見出し

1 för texten som ska visas här.

In order to prevent problems with the machine, follow the precautions
below.

This machine and AC adopter are

precision

products.

Handle

them

carefully, and do not drop them or allow

them to receive any shock or impact.

For the consumables other than the

tubes (tape cassette, ink ribbon case,

cutter, etc), use the specified products

only.

Never use other products.

When printing characters on the tubes,

do not use the tubes that has been bent,

crushed or badly stained. Especially,

hard dirt or foreign material attached to

the tubes may cause trouble of the

printer head.

Do not clog the exit of the tapes and

tubes. Do not insert things in it. Do not

pull the tapes or tubes when it is being

printed.

Do not lift up the machine having its

cassette cover.

The machine may fall.

If there is strong external noise or shock

applied to the machine during operation,

abnormal

displays

may

appear

contents of the memory may be erased.

Do not pull out the power cord while the

power key of the main body is turned on

or right after it is turned off, which may

cause malfunction or trouble such as

loss of contents of the setting or memory.

If tube is jammed, do not pull the tube by

hand.

Remove the jammed tube with

using the “FEED” function. (page 14)

Summary of Contents for LM390












































































Search results

Summary of Contents for LM390

Reviews:

Related manuals for LM390

Brands by name

Popular brands

Letatwin LM390, User Manual

Search results

Summary of Contents for LM390

Reviews:

Related manuals for LM390

Brands by name

Popular brands