Letatwin LM390 User Manual Download Page 66

Page: 66 / 75

Fel! Använd fliken Start om du vill tillämpa

見出し

1 för texten som ska visas här.

Error message

Contents

Countermeasure

NO USB MEMORY

The USB memory has not been
inserted.

Insert the USB memory.

OVER CAPACITY

The USB memory does not have
available space.

Use another USB memory or delete
unnecessary files to create space.

CANNOT RECALL
THIS FILE

Attempted to read a file which is
not compatible with LM-390A/PC.

LM-390A/PC can only read files of
“

CSV

” file format or “

LMF

” file format.

READ ONLY FILE

Attempt to overwrite or delete the
existing read-only file in the USB
memory.

To overwrite or delete the read-only
file, change its property to rewritable
file on a personal computer.

PRIOR

START

PRINTING, LOAD THE
MATERIAL
(TUBE/TAPE)

Attempt

start

printing

from

“LETATWIN PC EDITOR” on a
computer, without setting the print
material in the LM-390A/PC.

Set the print material, prior to start
printing.

[PC CONNECTION]
DATA ERROR

The

data

received

from

computer is abnormal.

Unable to receive the data from other
than “LETATWIN PC EDITOR”.
Press

ESC

and

check

USB

connection with PC, then try again.

[PC CONNECTION]
COMMAND ERROR

The command received from a
computer is abnormal.

Unable to receive the command from
other than “LETATWIN PC EDITOR”.
Press

ESC

and

check

USB

connection with PC, then try again.

Summary of Contents for LM390












































































Search results

Summary of Contents for LM390

Reviews:

Related manuals for LM390

Brands by name

Popular brands

Letatwin LM390, User Manual

Search results

Summary of Contents for LM390

Reviews:

Related manuals for LM390

Brands by name

Popular brands