Letatwin LM390, User Manual

Page: 26 / 75

Fel! Använd fliken Start om du vill tillämpa
見出し
1 för texten som ska visas här.
26
4-1 PRINTING ON THE TUBE (PITCH PRINT)
Printing the following contents on the tube.
Tube size=φ3. 2 mm
Pitch length= 18mm
U1 COM X1005 X1006 X1007
1pcs. 5pcs. 2pcs. 2pcs. 2pcs.
18mm 18mm 18mm 18mm 18mm
1. Set “ MATERIAL = TUBE ” and “ SIZE = 3.2mm ” in the [ PRINTED MATERIAL setting screen ].
2. [ INPUT screen ] appears. Make sure that
the arrow symbol “▲” is indicating “A” = capital
letters.
Press / key to move the cursor to .
3. Press PITCH to set “ PITCH LENGTH .” (See
6-4-1: PITCH LENGTH) Press / key to set
“ 18.0 .”
Press ENTER .
Note: It is also possible to input the value directly with
the Ten keys.
4. Press key to move the cursor after .
Press RPT to set “ REPEAT .” (See 6-7: REPEAT)
Press / key to set “ 1 .” Press ENTER .
Note: It is also possible to enter the value directly with
Ten key.
5. Input U 1 . Press BLOCK to create a new
block.
6. As same as “4”, press RPT to set “ Repeat ” to “ 5 .” Press ENTER .
▲ ２ ０ ．０ Ｃ Ｕ Ｔ ０ ０ １
Ｐ Ｉ Ｔ Ｃ Ｈ Ｌ Ｅ Ｎ Ｇ Ｔ Ｈ
＝
１ ８ ． ０ ｍ ｍ
B
P
▲ １ ８ ．０ Ｃ Ｕ Ｔ ０ ０ ２
Ｕ １
Ｔ Ｕ Ｂ Ｅ ３ ．２ ｍ ｍ
ＡＵＴＯ ＳＴＤ ＳＴＤ ００１
B P B
▲ １ ８ ．０ Ｃ Ｕ Ｔ ０ ０ １
Ｒ Ｅ Ｐ Ｅ Ａ Ｔ ＝
２ Ｐ Ｃ Ｓ
B
P