Letatwin LM390 Page 51 User Manual Download

Page: 51 / 75

Fel! Använd fliken Start om du vill tillämpa

見出し

1 för texten som ska visas här.

6-13-12 LCD BRIGHTNESS

Adjusting the “

LCD BRIGHTNESS

.”

When the screen is not visible enough, adjust the

“

LCD BRIGHTNESS

” level.

By pressing

key, increase or decrease the “

LCD BRIGHTNESS

” level.

Press

ENTER

to register the “

LCD BRIGHTNESS

” level.

Note:

● Without entering the OPTION menu, the adjustment of the “

LCD BRIGHTNESS

” is also

available by following way.

1. Turn on the power.

2. In the [

PRINTED MATERIAL

setting screen],

To increase the “

LCD BRIGHTNESS

,” press

key.

To decrease the “

LCD BRIGHTNESS

,” press

key.

● Depending on the temperature, “

LCD BRIGHTNESS

” adjustment might improve the

visibility of the screen.

6-13-13 LCD BACKLIGHT

Adjusting the “

LCD BACKLIGHT

” power level.

To save the power consumption, or to

optimize the screen visibility, adjust the “

LCD BACKLIGHT

” power level.

By pressing

key, select the “

LCD BACKLIGHT

” power level.

Press

ENTER

to register the “

LCD BACKLIGHT

” power level.

［ＬＣＤＢＲＩＧＨＴＮＥＳＳ］

■ ■ ■ ■ ■ ■ ■ ■ □ □ □ □ □ □ □ □

＜ＬＩＧＨＴＤＡＲＫ＞

［ＬＣＤＢＡＣＫＬＩＧＨＴ］

ＬＩＧＨＴ

ＤＡＲＫ

Summary of Contents for LM390












































































Search results

Summary of Contents for LM390

Reviews:

Related manuals for LM390

Brands by name

Popular brands

Letatwin LM390, User Manual

Search results

Summary of Contents for LM390

Reviews:

Related manuals for LM390

Brands by name

Popular brands