Letatwin LM390, User Manual

Page: 64 / 75

Fel! Använd fliken Start om du vill tillämpa
見出し
1 för texten som ska visas här.
64
9 TROUBLE SHOOTING
9-1 ERROR MESSAGE LIST
Error message Contents Countermeasure
OVER INPUT
CHARACTER NO. Number of characters input has
exceeded 5,000 characters/file. Characters more than 5,000/file
cannot be input.
OVER INPUT LINE
NO.
Number of lines of the document
to be input has exceeded 4 lines. The maximum lines are 4 lines.
Delete the texts in the excess line.
OVER INPUT BLOCK
NO. Number of blocks of the document
has exceeded 300 blocks/file. Blocks more than 300/file cannot be
input.
UNUSUAL POSITIOIN The cursor position is not correct.
Move the cursor to the normal
position.
UP TO 1PC. IN EACH
BLOCK Attempted to set 2 sequential
numbers in one block. Only one sequential number can be
set in one block.
UP TO 15PCS IN 1
FILE
Attempted to set more than 16
sequential numbers per file in
[
PITCH PRINT MODE ].
In [ PITCH PRINT MODE ], only up to
15 sequential numbers can be set in
a file.
OVER [N] NO.
Attempted to set more than 16
sequential
numbers were in
[ PITCH PRINT MODE ].
In [ PITCH PRINT MODE ], only up to
15 sequential numbers can be set in
a file.
SET ONLY ONE [N]
Attempted to set more than 2
sequential numbers per file in
[
NORMAL PRINT MODE ].
In [ NORMAL PRINT MODE ], only
one sequential number can be set in
a file.
DELETE OTHER [P]
FIRST When there are several [ P ] marks,
attempted to delete the first [ P ].
Delete all the other [ P ], then delete
the first [ P ].
SET [P] IN THE FIRST
BLOCK
In the [ NORMAL PRINT MODE ],
attempted to input [ P ] mark in the
middle of a document.
When changing from the [ NORMAL
PRINT MODE ] to the [ PITCH PRINT
MODE ], move the cursor to the top of
a document then input [ P ].
OVER [P] NO.
Attempted to set 6th pitch length
setting in a document. Only 5 pitch length settings can be
set in a document.
P/LENGTH IS SAME
AS LEFT [P]
Input pitch length in the middle of
a document, which is same value
as previous pitch length.
(Ignorable)
NO COPIED DATA
There are no data “ COPIED ” or
“ PASTED .”
Implement the “ PASTE ” after
“ COPY .”
Note: If the power is turned off, the
data copied is lost.
OVER COPY
CAPACITY Attempted to copy a block with
more than 51 characters. Copy the block which has only less
than 50 characters.
NO WORD IN THIS
BLOCK
Copy a block which has no text. Copy a block which has some text.