Letatwin LM390 User Manual Download Page 53

Page: 53 / 75

Fel! Använd fliken Start om du vill tillämpa

見出し

1 för texten som ska visas här.

6-15 MEMORY

6-15-1 INTERNAL MEMORY

The created documents and their setting values can be saved in the internal memory.

The saving capacity is up to 50 files and up to 100,000 characters in total (depending on the

file contents).

and

can also be saved.

1. Press

MEMORY . The [

MEMORY setting

screen

]

appears.

2. Press / /▲/▼ key to select a desired item and press ENTER .

Selectable items: RECALL, SAVE, DELETE, INITI. (INITIALIZE)

[SAVE]

Saving the created document in the selected file No.

1. Select

SAVE .

And then press

ENTER .

The [

FILE NO. selection screen

] appears.

Note:

The first 10 characters of the document that has been saved are displayed in this screen.

If any document is not saved in the selected file No., “

NO FILE

” appears.

2. Press

key or Ten key to select the file No that

“NO FILE” is displayed..

3. Press

ENTER

to save the selected document in

the selected file No.

Setting range: 1

～

［ＩＮＴＥＲＮＡＬＭＥＭＯＲＹ］

ＲＥＣＡＬＬ

ＳＡＶＥ

ＤＥＬＥＴＥＩＮＩＴＩ．

［ＳＡＶＥ］

ＦＩＬＥＮＯ．＝

２

－ＮＯＦＩＬＥ－

［ＳＡＶＥ］

ＦＩＬＥＮＯ．＝

１

・ＴＵＢＥ

Ａ２Ｘ１０

Summary of Contents for LM390












































































Search results

Summary of Contents for LM390

Reviews:

Related manuals for LM390

Brands by name

Popular brands

Letatwin LM390, User Manual

Search results

Summary of Contents for LM390

Reviews:

Related manuals for LM390

Brands by name

Popular brands