Leprecon LP-X24, User Manual, Page: 84 / 228

80 Chapter Three Conventional Light Programming
LP-X24 and LP-X48 Users Manual
Edit Mode
playback & stack select buttons.
Please select a scene to edit using the
2. Press the Select button for the playback repeatedly until you reach the look you
want to edit.
The LP-X displays information for that look of the playback. Because the
Programmer Fader is set to zero, no data for the look is output to the stage.
Edit: PG 1 PB 6 Step: 1
Save
Select
Level
Fade
0:00
50
01 02 03 04 05 06 07 08 09 10 11 12
13 14 15 16 17 18 19 20 21 22 23 24
FF
3. Raise or lower manual scene faders to add lights to, remove lights from or change
current levels in the look.
For example, match and grab the 50% level on Manual Scene Fader 1 and then
increase it to 100%.
For example, match and grab the 100% level on Manual Scene Fader 2 and then
decrease it to 25%.
For example, match and grab the 0% level on Manual Scene Fader 3 and then
increase it to 50%.
Note that these changes will not be visible in the lights, regardless of the positions of
the
Master Fader and Manual Fader . All edits are done blind. The level changes will
be reflected in the LEDs for the Manual Scene Faders .