manualshive.com logo in svg

Leprecon LP-X24, User Manual, Page: 113 / 228

Share
Download
Leprecon LP-X24 User Manual Download Page 113

Advanced Programming and Editing Techniques

Chapter Five

109

LP-X24 and LP-X48 Users Manual

Copy

Edit Playback

Erase

Edit

Chase

Global

PG 01 PB 01 (12)

PG 01 PB 02 (6)
PG 03 PB 06 (28)

2. Use the side wheel to select the playback you want to copy.

3. Press the 

Copy

 softkey.

The LP-X displays the 

Copy Playback

 screen.

Copy Playback

Select the destination playback and

Playback

1

Page

1

Copy

confirm with Yes or the Copy softkey.

4. Select the page and playback to which you will copy the selected playback.

5. Press the 

Yes

 key or the 

Copy

 softkey to complete the operation. Press the 

No/Esc

key to cancel the operation.

If you have selected a page/playback that already has information recorded on it, the
LP-X displays the following message:

Summary of Contents for LP-X24





































































































































































































































Reviews:

No comments