manualshive.com logo in svg

Leprecon LP-X24, User Manual, Page: 183 / 228

Share
Download
Leprecon LP-X24 User Manual Download Page 183

Moving Light Effects

Chapter Eleven

179

LP-X24 and LP-X48 Users Manual

2. Select the lights that you want to include in the effect.

See "Selecting Moving Lights for Programming" beginning on page 87 for complete
details about selecting lights.

Although you may include any light in an iris flick effect, only lights from the library
that have an iris attribute will be able to execute it. User-created devices will not be
able to execute the iris flick.

3. Press the 

Beam

 softkey twice.

The 

Beam Effects

 screen appears.

Create

Recording new scene

None of the selected instruments have

effects.

Press Create to add effects.

Beam Effects

4. Press the 

Create

 softkey.

The 

Choose an effect

 screen appears.

Create

Choose an effect

Label Chase

Iris Flick

5. Using the left wheel, the side wheel or the 

Plus (+)

 and 

Minus (-)

 keys, select 

Iris

Flick

.

6. Press the 

Create

 softkey.

The 

Beam Effect: Iris Flick

 screen appears and all selected lights that have an iris

attribute begin executing the effect.

Summary of Contents for LP-X24





































































































































































































































Reviews:

No comments