Leprecon LP-X24 User Manual Download Page 134

Page: 134 / 228

130

Chapter Six

Creating Moving Light Labels

LP-X24 and LP-X48 Users Manual

Label Name

Label Name:
Focus_001

Please enter a name for the new label.

Yes / No

8. If desired, use the numeric keypad to enter a name for the

Focus

label.

9. Press the

Yes

key to confirm the operation. Press

No/Esc

to cancel the operation.

The LP-X saves the label and returns to the

Label Creation

screen.

NoDws

MY FOCUS

SaveAs

Save

Pan:
220

Focus:
N/C

Tilt:

115

10. If desired, update the label and press the

Save

softkey to save your changes.

11. If desired, update the label and press the

SaveAs

softkey to create a new label.

12. When you are done, press the

No/Esc

button.

The LP-X displays the label or labels that you created.

Summary of Contents for LP-X24





































































































































































































































Search results

Summary of Contents for LP-X24

Reviews:

Leprecon LP-X24, User Manual, Page: 134 / 228

Search results

Summary of Contents for LP-X24

Reviews: