manualshive.com logo in svg

Leprecon LP-X24, User Manual, Page: 139 / 228

Share
Download
Leprecon LP-X24 User Manual Download Page 139

Creating Moving Light Labels

Chapter Six

135

LP-X24 and LP-X48 Users Manual

Rename Label

Renaming this label will affect all

selected fixture types.

Yes / No

New label name:
MY LABEL

6. Enter a new name for the label.

7. Press 

Yes

 to rename the label. Press 

No/Esc

 to cancel the operation.

To Delete a Label

Any scenes (looks) using a deleted label will be set to 

No Change

.

1. Put the LP-X into the following modes for moving light recording:

Button/Fader

Setting

Modes

Record

 and 

Scene

Display

ML

Filter

ML

Bump

Any setting

Master Fader

Up (typically full on)

Manual Fader

Any setting

Programmer Fader

Up

The LP-X displays the 

Moving Light Programmer

.

2. Press the 

Color

, 

Beam

 or 

Focus

 softkey.

3. Press the 

Label

 softkey.

4. Select the label that you want to delete.

If you do not see the label, you may need to restrict the instrument selection. The 

ML

Programmer

 only shows the labels that the selected instruments share in common.

5. Press the 

Delete

 softkey.

Summary of Contents for LP-X24





































































































































































































































Reviews:

No comments