manualshive.com logo in svg

Leprecon LP-X24, User Manual, Page: 161 / 228

Share
Download
Leprecon LP-X24 User Manual Download Page 161

Stacks

Chapter Ten

157

LP-X24 and LP-X48 Users Manual

Button/Fader

Setting

Bump

Any setting

Master Fader

Up (typically full on)

Manual Fader

Down for a blind edit, Up for
a live edit

Programmer Fader

Down for a blind edit, Up for
a live edit

The LP-X displays the 

Edit Mode

 screen.

Edit Mode

playback & stack select buttons.

Please select a scene to edit using the

2. Press the stack's 

Select

 button repeatedly to take you to the stack step you want to

edit.

Press the 

Minus

 key (

-

) plus the stack's 

Select

 button to move backwards through

the stack steps.

3. Edit the look of the step.

The techniques for editing the look of a stack step are the same as those for editing
a playback step. Please see "Modifying Conventional Light Looks" beginning on
page 77 and "Modifying Moving Light Looks" beginning on page 100 for complete
details.

4. Press the 

Save

 softkey to save the changes.

5. Repeat steps 2 through 4 until you have made all the desired changes.

6. Return to 

Run

 mode.

To Insert a Step into a Stack

Use this procedure to insert a blank step into a specific location in the stack or to copy a
stack step and insert in a specific location in the stack.

1. Put the LP-X into the following modes for editing:

Summary of Contents for LP-X24





































































































































































































































Reviews:

No comments