Leprecon LP-X24 User Manual Download Page 188

Page: 188 / 228

184

Chapter Eleven

Moving Light Effects

LP-X24 and LP-X48 Users Manual

2. Select the lights that you want to include in the effect.

See "Selecting Moving Lights for Programming" beginning on page 87 for complete
details about selecting lights.

3. Press the

Focus

softkey twice.

The

Focus Effects

screen appears.

Create

Recording new scene

None of the selected instruments have

effects.

Press Create to add effects.

Focus Effects

4. Press the

Create

softkey.

The

Choose an effect

screen appears.

Create

Choose an effect

Circle

Ballyhoo

Polygon
Rectangle
Sweep/Fan
Triangle

5. Using the left wheel, the side wheel or the

Plus (+)

and

Minus (-)

keys, select a

focus effect.

6. Press the

Create

softkey.

The

Focus Effect:

screen appears and all selected lights begin executing the effect.

Shown below is the

Focus Effect: Polygon

screen.

Summary of Contents for LP-X24





































































































































































































































Search results

Summary of Contents for LP-X24

Reviews:

Leprecon LP-X24, User Manual, Page: 188 / 228

Search results

Summary of Contents for LP-X24

Reviews: