Leprecon LP-X24 User Manual Download Page 151

Page: 151 / 228

Chases

Chapter Nine

147

LP-X24 and LP-X48 Users Manual

Copy

Edit Playback

Erase

Edit

Unchse

Global

Bkwd

PG 01 PB 01 (12)

PG 01 PB 02 (6) CHASE 15 BPM

PG 03 PB 06 (28)

2. Using the side wheel or the

(

Plus

) and

–

(

Minus

) keys, select the page and

playback of the scene list that you want to convert from a chase back to a scene list.

3. Press the

Unchse

softkey.

The

Unchse

softkey text changes to

Chase

and the line for the page and playback

doesn't say

Chase

any more.

Copy

Edit Playback

Erase

Edit

Chase

Global

PG 01 PB 01 (12)

PG 01 PB 02 (6)
PG 03 PB 06 (28)

5. Return to

Run

mode.

Working with Chases at Run Time

During run time, you may decide to chase or unchase a scene list on a playback. This is
easily done without switching into

Edit

mode.

To Chase or Unchase a Scene List at Run Time

1. Put the LP-X into the following modes for playback:

Button/Fader

Setting

Modes

Run

and

Playback

Display

N/A

Summary of Contents for LP-X24





































































































































































































































Search results

Summary of Contents for LP-X24

Reviews:

Leprecon LP-X24, User Manual, Page: 151 / 228

Search results

Summary of Contents for LP-X24

Reviews: