Leprecon LP-X24 User Manual Download Page 112

Page: 112 / 228

108

Chapter Five

Advanced Programming and Editing Techniques

LP-X24 and LP-X48 Users Manual

Edit Mode

playback & stack select buttons.

Please select a scene to edit using the

2. Press the

Select

button for the playback repeatedly until you reach the look you

want to copy.

The LP-X displays information for that look of the playback. The LP-X outputs the
look to the

Programmer Fader

3. Switch to

Record

mode.

4. Copy the look to a new location by pressing the

Select

button for the desired page

and playback.

The LP-X "copies" the look to the next available step on the playback.

The amount of material that is copied depends upon your Filter setting. With

Dim

selected, only conventional light information is copied. With

selected, only

moving light information is copied. With

Both

selected, all information for the look is

copied.

Copying a Playback

Use this procedure to copy all scenes from one Page/Playback to another.

To Copy a Playback

1. Put the board into

Edit/Playback

mode.

Summary of Contents for LP-X24





































































































































































































































Search results

Summary of Contents for LP-X24

Reviews:

Leprecon LP-X24, User Manual, Page: 112 / 228

Search results

Summary of Contents for LP-X24

Reviews: