manualshive.com logo in svg

Leprecon LP-X24, User Manual, Page: 117 / 228

Share
Download
Leprecon LP-X24 User Manual Download Page 117

Advanced Programming and Editing Techniques

Chapter Five

113

LP-X24 and LP-X48 Users Manual

Do this following the procedures given in "To Record Conventional

Light Looks" beginning on page 73 and "

Dowse

 versus 

No Dowse 

Mode

The LP-X provides you two different modes in which to program.

In "Dowse" mode, you only see the lights that are selected

that is, the lights that are

actively selected for programming.

In "No Dowse" mode, you see all lights in the look whether they are selected or not.

Toggle between these two modes when you are recording moving lights by pressing the
side wheel.

Label

Recording new scene

ColrFx

Beam

Attrib

Focus

No instruments selected.

Delay
0:00.0

Fade

0:00.0

100%

Dowse

Intensity:

Label

Recording new scene

ColrFx

Beam

Attrib

Focus

No instruments selected.

Delay
0:00.0

Fade

0:00.0

100%

No Dowse

Intensity:

Recording Moving Light Looks" beginning on page 90.

2. Put the board into 

Edit/Playback

 mode.

Summary of Contents for LP-X24





































































































































































































































Reviews:

No comments