Leprecon LP-X24 User Manual Download Page 130

Page: 130 / 228

126

Chapter Six

Creating Moving Light Labels

LP-X24 and LP-X48 Users Manual

Label Name

Label Name:
Color_001

Please enter a name for the new label.

Yes / No

8. If desired, use the numeric keypad to enter a name for the label.

9. Press the

Yes

key to confirm the operation. Press

No/Esc

to cancel the operation.

The LP-X saves the label and returns to the

Label Creation

screen.

NoDws

MY COLOR : Studio Color 250

SaveAs

Save

Color mix Cyan

Color mix Magen

100

Color mix Yell

250

10. If desired, update the label and press the

Save

softkey to save your changes.

11. If desired, update the label and press the

SaveAs

softkey to create a new label.

12. When you are done, press the

No/Esc

button.

The LP-X displays the label or labels that you created.

Summary of Contents for LP-X24





































































































































































































































Search results

Summary of Contents for LP-X24

Reviews:

Leprecon LP-X24, User Manual, Page: 130 / 228

Search results

Summary of Contents for LP-X24

Reviews: