Leprecon LP-X24 User Manual Download Page 175

Page: 175 / 228

Moving Light Effects

Chapter Eleven

171

LP-X24 and LP-X48 Users Manual

The

Choose an effect

screen appears.

Create

Choose an effect

Wheel Order

Label Chase

5. Using the left wheel, the side wheel or the

Plus (+)

and

Minus (-)

keys, select

Wheel

Order

6. Press the

Create

softkey.

The

Color Effect: Wheel Order

screen appears and all selected lights begin

executing the effect.

Recording new scene

Seq

Fade

0:00.0

Rate

0:01.0

Start Delay

0:00.0

Color Effect: Wheel Order

7. Adjust the

Fade

Rate

Start Delay

and

Loops

parameters as desired.

Use the side wheel to display the

Loops

parameter.

8. When you are ready, record the effect to a playback by pressing its

Playback Select

button.

Summary of Contents for LP-X24





































































































































































































































Search results

Summary of Contents for LP-X24

Reviews:

Leprecon LP-X24, User Manual, Page: 175 / 228

Search results

Summary of Contents for LP-X24

Reviews: