Leprecon LP-X24 User Manual Download Page 69

Page: 69 / 228

Setup Essentials

Chapter Two

LP-X24 and LP-X48 Users Manual

Backup Show

This will save the current show and back

Yes / No

it up to the floppy drive.

Please place a blank formatted disk in

the drive and press Yes to continue.

4. Insert a blank, formatted disk in the drive and then press

Yes

The LP-X has a progress indicator that informs you which show file is being copied
and when the show file backup is completed.

NOTE:

The LP-X checks the floppy disk that you insert into the drive to determine

whether or not it is blank. If there is any information on the disk, the LP-X warns you if it
will have to overwrite any of the files.

To Restore a Show

1. From the

Setup Mode

screen, use the side wheel to scroll to the second menu.

2. Press the

Show

softkey.

The

Show Maintenance

screen appears.

3. Press the

Reload

softkey.

Restore Show

This will load a show from the floppy

Yes / No

disk and overwrite the current show.

Please place a show disk in the drive

and press Yes to continue.

4. Insert a show disk into the disk drive and press

Yes

The LP-X has a progress indicator that informs you which show file is being restored
and when the operation is complete.

Summary of Contents for LP-X24





































































































































































































































Search results

Summary of Contents for LP-X24

Reviews:

Leprecon LP-X24, User Manual, Page: 69 / 228

Search results

Summary of Contents for LP-X24

Reviews: