![Lenovo ThinkServer TS450 User Manual And Hardware Maintenance Manual Download Page 62](http://html.mh-extra.com/html/lenovo/thinkserver-ts450/thinkserver-ts450_user-manual-and-hardware-maintenance-manual_203108062.webp)
• See “Creating RAID volumes” on page 47 for RAID volume creation.
• Use the up and down arrow keys to select
Exit
and press Enter.
Marking disks as spare
To mark hard disk drives as spare drives, do the following:
1. During the system startup, press Ctrl+I when prompted to enter the Intel Rapid Storage Technology
enterprise option ROM configuration utility.
2. Use the up and down arrow keys to select
Mark Disks as Spare
and press Enter.
3. Use the arrow keys to locate a hard disk drive and press the space key to select or deselect the hard disk
drive. You can select multiple hard disk drives if required. Then, press Enter to complete the selection.
4. When prompted, press Y to confirm the operation.
Note:
Marking a hard disk drive as a spare drive will remove all data on the drive.
5. When finished, select
Exit
and press Enter.
Notes:
If your server has one of the following Linux operating systems installed, continue with the
corresponding actions:
• For the Redhat Enterprise Linux 6.7 operating system, add the following line to the end of the
/etc/mdadm.conf
file and restart the operating system.
POLICY domain=DOMAIN path=* metadata=imsm action=spare-same-slot
• For the SUSE Linux Enterprise Server 11.4 operating system, do the following:
1. Add the following line to the end of the
/etc/mdadm.conf
file.
POLICY domain=DOMAIN path=* metadata=imsm action=spare-same-slot
2. Run the following commands as a root user.
# chkconfig –s mdadmd on
# /etc/init.d/mdadmd start
Configuring advanced SATA or SAS hardware RAID
Some server models come with a required RAID card to provide advanced SATA/SAS hardware RAID
functions to the server. You also can purchase the RAID card from Lenovo and install it into server models
that support the RAID card to get advanced SATA/SAS hardware RAID functions. See “RAID card” on page
24 and “PCIe card” on page 58 for more information.
Note:
For server models with more than four HDDs or models that use SAS HDDs, a RAID card must
be installed.
Programs for configuring SATA/SAS hardware RAID
Lenovo provides the following programs to help you configure advanced SATA/SAS hardware RAID:
• ThinkServer EasyStartup program to configure RAID
See “Using the ThinkServer EasyStartup program” on page 41 and view the user guide from the main
interface of the program.
• WebBIOS Configuration Utility program (configuring RAID independently of the operating system)
To use the program, follow the instructions on the booting screen.
• MegaRAID Storage Manager program and the StorCLI Configuration Utility program (configuring RAID in
an operating system environment)
To install and use the MegaRAID Storage Manager program, refer to the following chapters in the
MegaRAID SAS Software User Guide
:
Note:
Some information in these chapters might be intended for the advanced SATA/SAS hardware RAID
configurations and might not apply to the onboard SATA software configurations.
48
ThinkServer TS450 User Guide and Hardware Maintenance Manual
Summary of Contents for ThinkServer TS450
