Lenovo ThinkServer TS450, User Manual And Hardware Maintenance Manual

Page: 29 / 166

Rear view of the server
This topic provides information to help you locate the connectors and components on the rear of your
server. The following illustration shows the rear view of the server with a screw-secured, non-hot-swap
power supply assembly.
Note: Depending on the model, your server might look slightly different from the illustrations in this topic.
5 6 7 8
3 4
1
2
3
4
5
6
7
8
9
10
11
Figure 4. Rear view of the server
1
Power cord connector
2
Serial connector
3
VGA connector (DB-15)
4
DisplayPort connector
5
USB 3.0 connectors (4)
6
USB 3.0 connectors (2)
7
Ethernet connector (RJ-45)
8
Microphone connector
9
Audio line-out connector
10
Audio line-in connector
11
Expansion card area
Your server model might have one or two hot-swap redundant power supplies. Each hot-swap redundant
power supply has one power cord connector on the rear of the server. For each hot-swap redundant power
supply, there might be one or two status LEDs on the power supply near the power cord connector. For
information about the status LEDs, see “Hot-swap power supply status LEDs” on page 24.
1
Power cord connectors
Used to connect the power cord.
2 Serial connector
Used to attach a device that uses a 9-pin serial connector.
Chapter 3
.
Product overview
15