Lenovo ThinkServer RD350G User Manual And Hardware Maintenance Manual Download Page 42

Page: 42 / 186

ThinkServer RAID 520i PCIe Adapter

The RAID 520i Adapter provides advanced SATA/SAS hardware RAID functions. The following illustration
shows the connectors on the adapter.

Figure 10. ThinkServer RAID 520i PCIe Adapter

Connector 0

Used to connect the mini-SAS signal cable connector on the backplane to support HDD 0-3.

Connector 1

Used to connect the mini-SAS signal cable connector on the backplane to support HDD 4-7.

J3 connector

Used to connect to a ThinkServer RAID 520i upgrade key.

ThinkServer RD350G User Guide and Hardware Maintenance Manual

Summary of Contents for ThinkServer RD350G



























































































































































































Search results

Summary of Contents for ThinkServer RD350G

Reviews:

Related manuals for ThinkServer RD350G

Brands by name

Popular brands

Lenovo ThinkServer RD350G, User Manual And Hardware Maintenance Manual

Search results

Summary of Contents for ThinkServer RD350G

Reviews:

Related manuals for ThinkServer RD350G

Brands by name

Popular brands