Lenovo ThinkServer RD350G, User Manual And Hardware Maintenance Manual

Page: 151 / 186

5. Remove the old coin-cell battery.
Figure 114. Removing the coin-cell battery
6. Install a new coin-cell battery.
Figure 115. Installing the coin-cell battery
7. If you have lifted up the riser card assembly, reinstall it into the chassis. See
“Replacing the riser
card assembly” on page 133.
8. Dispose of the old coin-cell battery as required by local ordinances or regulations.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the replacement, go to “Completing the parts replacement” on page 142.
Note: After you replace the system board battery, you must reset passwords, reset system date and time,
and reconfigure the server. See
Chapter 5 “Configuring the server” on page 43.
For service technician only: replacing the system board
CAUTION:
Hazardous moving parts. Keep fingers and other body parts away.
Chapter 6
.
Replacing hardware
137
per only vice personnel enovo. your
eading and page and page