Lenovo ThinkServer RD350G User Manual And Hardware Maintenance Manual Download Page 130

Page: 130 / 186

2. Press the release button

to open the handle of the dummy hard-disk-drive tray.

Figure 85. Opening the handle of the dummy hard-disk-drive tray

3. Pull the handle and carefully slide the dummy hard-disk-drive tray out of the front of the chassis.

Figure 86. Removing the dummy hard-disk-drive tray

4. Touch the static-protective package that contains the 2.5-inch drive to any unpainted surface on the

outside of the server. Then, take the 2.5-inch drive out of the package.

Note:

Do not touch the circuit board on the drive.

116

ThinkServer RD350G User Guide and Hardware Maintenance Manual

Summary of Contents for ThinkServer RD350G



























































































































































































Search results

Summary of Contents for ThinkServer RD350G

Reviews:

Related manuals for ThinkServer RD350G

Brands by name

Popular brands

Lenovo ThinkServer RD350G, User Manual And Hardware Maintenance Manual

Search results

Summary of Contents for ThinkServer RD350G

Reviews:

Related manuals for ThinkServer RD350G

Brands by name

Popular brands