Lange Wand 9
31812 Bad Pyrmont, Germany
Phone: +49 (5281) 9309-0
Fax: +49 (5281) 9309-30
https://www.meinbergglobal.com
[email protected]
LANTIME M100: NTP Time Server with internal Reference Clock for DIN
Rail Installations
LANTIME M100 time servers can be installed to provide accurate time to small and medium sized computer
networks. This entry level time server synchronizes all systems either NTP- or SNTP-compatible utilizing a
built-in Meinberg radio clock as its primary reference time source. A stable and precise oscillator is capable of
bridging interferences or a temporary loss of reception. Its compact form factor offers an ideal solution to
network time synchronization needs in industrial and power generation/distribution networks.
- Selectable Reference Sources: GPS: Satellite receiver for the Global Positioning System GNS:
Combined GPS/GLONASS/Galileo/BeiDou satellite receiver (L1 frequency band), can also be used for
mobile applications GNS-UC: GPS and Galileo Satellite Receiver with Up-Converter for Meinberg GPS
Antenna/Converter PZF: DCF77 correlation receiver for middle europe
- Synchronization of NTP and SNTP compatible clients
- Web-based status and configuration interface and console-based graphical configuration utility
- Supported net protocols: IPv4, IPv6, NTP, (S)NTP, DAYTIME, DHCP, HTTP, HTTPS, FTP, SFTP,
SSH, SCP, SYSLOG, SNMP, TIME, TELNET
- USB Port for installing firmware updates, locking frontpanel menu access and backup/restore of
configuration and log files
- Meinberg GPS Antenna/Converter Unit connected with up to 300m of standard coaxial cable RG58
rev 2022.1026.0953
lantime-m100
Page 1/4
