Lenovo ThinkCentre M79 Hardware Maintenance Manual Download Page 149

Page: 149 / 186

5. Pivot the drive bay assembly upward. See “Accessing the system board components and drives” on

page 108.

6. Disconnect the thermal sensor cable from the thermal sensor connector on the system board.

7. On the inner side of the front panel, press the left retaining clip

that secures the plastic holder of the

thermal sensor as shown and then push the clip out of the outer side of the front panel. Then, disengage
the plastic holder holding the thermal sensor from the chassis.

Figure 57. Removing the thermal sensor

8. Pull the entire thermal sensor out of the chassis.

Chapter 11

Installing or replacing hardware

141

Summary of Contents for ThinkCentre M79


























































































































































































Search results

Summary of Contents for ThinkCentre M79

Reviews:

Related manuals for ThinkCentre M79

Brands by name

Popular brands

Lenovo ThinkCentre M79, Hardware Maintenance Manual

Search results

Summary of Contents for ThinkCentre M79

Reviews:

Related manuals for ThinkCentre M79

Brands by name

Popular brands