Lenovo ThinkCentre M79 Hardware Maintenance Manual Download Page 128

Page: 128 / 186

9. Slide the new solid-state drive into the solid-state drive bracket as shown until the four holes in the

drive are aligned with the corresponding holes in the bracket. Then, install the four screws to secure the
new solid-state drive to the bracket.

Figure 30. Installing the solid-state drive into the bracket

10. Carefully slide the solid-state drive bracket downward until it is secured by the three retaining clips

the bottom of the optical drive bay.

Figure 31. Installing the solid-state drive bracket

120

ThinkCentre M79 Hardware Maintenance Manual

Summary of Contents for ThinkCentre M79


























































































































































































Search results

Summary of Contents for ThinkCentre M79

Reviews:

Related manuals for ThinkCentre M79

Brands by name

Popular brands

Lenovo ThinkCentre M79, Hardware Maintenance Manual

Search results

Summary of Contents for ThinkCentre M79

Reviews:

Related manuals for ThinkCentre M79

Brands by name

Popular brands