Lenovo ThinkCentre M79 Hardware Maintenance Manual Download Page 126

Page: 126 / 186

3. Position the solid-state drive into the storage converter so that the holes in the drive are aligned with

the corresponding holes in the converter. Then, install the four screws to secure the solid-state drive
to the converter.

Figure 27. Installing the solid-state drive into the storage converter

Replacing the solid-state drive on the bottom of the optical drive bay

To replace the solid-state drive on the bottom of the optical drive bay, do the following:

1. Remove any media from the drives and turn off all attached devices and the computer. Then, disconnect

all power cords from electrical outlets and disconnect all cables that are connected to the computer.

2. Remove the computer cover. See “Removing the computer cover” on page 105.

3. Remove the front bezel. See “Removing and reinstalling the front bezel” on page 106.

4. Pivot the drive bay assembly upward. See “Accessing the system board components and drives” on

page 108.

5. Disconnect the signal cable and the power cable from the solid-state drive.

118

ThinkCentre M79 Hardware Maintenance Manual

Summary of Contents for ThinkCentre M79


























































































































































































Search results

Summary of Contents for ThinkCentre M79

Reviews:

Related manuals for ThinkCentre M79

Brands by name

Popular brands

Lenovo ThinkCentre M79, Hardware Maintenance Manual

Search results

Summary of Contents for ThinkCentre M79

Reviews:

Related manuals for ThinkCentre M79

Brands by name

Popular brands