Lenovo ThinkCentre M79 Hardware Maintenance Manual Download Page 139

Page: 139 / 186

6. At the rear of the computer, remove the three screws that secure the power supply assembly. Press the

power supply clip

downward to release the power supply assembly and then slide the power supply

assembly to the front of the computer. Lift the power supply assembly out of the computer.

Figure 47. Removing the power supply assembly

7. Make sure that the new power supply assembly is the correct replacement.

8. Install the new power supply assembly into the chassis so that the screw holes in the new power supply

assembly are aligned with the corresponding holes in the rear of the chassis. Then, install the three
screws to secure the new power supply assembly in place.

Note:

Use only screws provided by Lenovo.

Figure 48. Installing the power supply assembly

Chapter 11

Installing or replacing hardware

131

Summary of Contents for ThinkCentre M79


























































































































































































Search results

Summary of Contents for ThinkCentre M79

Reviews:

Related manuals for ThinkCentre M79

Brands by name

Popular brands

Lenovo ThinkCentre M79, Hardware Maintenance Manual

Search results

Summary of Contents for ThinkCentre M79

Reviews:

Related manuals for ThinkCentre M79

Brands by name

Popular brands