Lenovo ThinkCentre M79 Hardware Maintenance Manual Download Page 104

Page: 104 / 186

Message/Symptom

FRU/Action

Program loads from the hard disk with a known-good
diagnostics diskette in the first 3.5-inch diskette drive

1. Run the Setup Utility program and check Startup

sequence.

2. Diskette Drive

3. Diskette Drive Cable

4. System Board

5. Power Supply

RPL computer cannot access programs from its own hard
disk.

1. If network administrator is using LCCM Hybrid RPL,

check startup sequence:

First device - network

Second device - hard disk

2. Hard disk drive

RPL computer does not RPL from server

1. Check startup sequence.

2. Check the network adapter LED status.

Serial or parallel connector device failure (system board
connector)

1. External Device Self-Test OK?

2. External Device

3. Cable

4. System Board

Serial or parallel connector device failure (adapter
connector)

1. External Device Self-Test OK?

2. External Device

3. Cable

4. Alternate Adapter

5. System Board

Some or all keys on the keyboard do not work

1. Keyboard

2. Keyboard Cable

3. System Board

Undetermined problems

This section provides instructions on how to find out the failing devices or adapters.

1. Power-off the computer.

2. Remove or disconnect the following components (if installed) one at a time.

a. External devices (modem, printer, or mouse)

b. Any adapters

c. Memory modules

d. Extended video memory

e. External Cache

f. External Cache RAM

g. Hard disk drive

h. Diskette drive

3. Power-on the computer to re-test the system.

4. Repeat steps 1 through 3 until you find the failing device or adapter.

If all devices and adapters have been removed, and the problem continues, replace the system board.
See “Replacing the system board” on page 135.

ThinkCentre M79 Hardware Maintenance Manual

Summary of Contents for ThinkCentre M79


























































































































































































Search results

Summary of Contents for ThinkCentre M79

Reviews:

Related manuals for ThinkCentre M79

Brands by name

Popular brands

Lenovo ThinkCentre M79, Hardware Maintenance Manual

Search results

Summary of Contents for ThinkCentre M79

Reviews:

Related manuals for ThinkCentre M79

Brands by name

Popular brands