Lenovo ThinkCentre M73 User Manual Download Page 70

Page: 70 / 162

5. Remove the two screws that secure the hard disk drive assembly. Slide the hard disk drive assembly as

shown, and then lift the hard disk drive assembly to remove it from the computer.

Figure 40. Removing the hard disk drive assembly

To install the hard disk drive assembly, do the following:

1. Position the hard disk drive assembly on the system board so that the two holes in the hard disk drive

bracket are aligned with the standoffs on the system board. Slide the hard disk drive assembly as shown
until the two screw holes

are aligned with the corresponding screw posts on the system board.

Figure 41. Installing the hard disk drive assembly

ThinkCentre M73 User Guide

Summary of Contents for ThinkCentre M73



































































































































































Search results

Summary of Contents for ThinkCentre M73

Reviews:

Related manuals for ThinkCentre M73

Brands by name

Popular brands

Lenovo ThinkCentre M73, User Manual

Search results

Summary of Contents for ThinkCentre M73

Reviews:

Related manuals for ThinkCentre M73

Brands by name

Popular brands