Lenovo ThinkCentre M73 User Manual Download Page 74

Page: 74 / 162

10. Use the Setup Utility program to set the date, time, and any passwords. See Chapter 7 “Using the Setup

Utility program” on page 93.

Replacing the Power button board

Attention:

Do not open your computer or attempt any repair before reading and understanding the “Important safety information”
on page v.

This section provides instructions on how to replace the Power button board.

To replace the Power button board, do the following:

1. Turn off the computer and disconnect all power cords from electrical outlets.

2. Remove the computer cover. See “Removing the computer cover” on page 55.

3. Locate the Power button board. See “Locating components” on page 11.

4. Remove the hard disk drive assembly. See “Installing or removing the hard disk drive assembly” on

page 57.

5. Disconnect the Power button board cable from the corresponding connector on the system board.

6. Remove the screw that secures the Power button board to the computer, and then pull the Power

button board to remove it from the computer.

Figure 47. Removing the Power button board

ThinkCentre M73 User Guide

Summary of Contents for ThinkCentre M73



































































































































































Search results

Summary of Contents for ThinkCentre M73

Reviews:

Related manuals for ThinkCentre M73

Brands by name

Popular brands

Lenovo ThinkCentre M73, User Manual

Search results

Summary of Contents for ThinkCentre M73

Reviews:

Related manuals for ThinkCentre M73

Brands by name

Popular brands