Lenovo ThinkCentre M73 User Manual Download Page 20

Page: 20 / 162

Locating connectors, controls, and indicators on the front of your
computer

Figure 1 “Front connector, control, and indicator locations” on page 8 shows the locations of the connectors,
controls, and indicators on the front of your computer.

Figure 1. Front connector, control, and indicator locations

Power button

Bluetooth activity indicator

Wireless activity indicator

Hard disk drive activity indicator

Power indicator

USB 3.0 connector

Microphone connector

Headset connector

Always On USB 3.0 connector

Notes:

• Indicators

, and

are visible only when they are lit.

• The headset connector

supports a microphone-integrated headset and does not support a

conventional microphone.

ThinkCentre M73 User Guide

Summary of Contents for ThinkCentre M73



































































































































































Search results

Summary of Contents for ThinkCentre M73

Reviews:

Related manuals for ThinkCentre M73

Brands by name

Popular brands

Lenovo ThinkCentre M73, User Manual

Search results

Summary of Contents for ThinkCentre M73

Reviews:

Related manuals for ThinkCentre M73

Brands by name

Popular brands