Lenovo ThinkCentre M73 User Manual Download Page 90

Page: 90 / 162

4. Lift the small handle

and open the retainer

to access the microprocessor

Figure 70. Accessing the microprocessor

5. Lift the microprocessor straight up and out of the microprocessor socket.

Notes:

• Your microprocessor and socket might look different from the one illustrated.

• Touch only the edges of the microprocessor. Do not touch the gold contacts on the bottom.

• Do not drop anything onto the microprocessor socket while it is exposed. The socket pins must be

kept as clean as possible.

Figure 71. Removing the microprocessor

6. Ensure that the small handle is in the raised position and the microprocessor retainer is fully open.

7. Remove the protective cover that protects the gold contacts of the new microprocessor.

ThinkCentre M73 User Guide

Summary of Contents for ThinkCentre M73



































































































































































Search results

Summary of Contents for ThinkCentre M73

Reviews:

Related manuals for ThinkCentre M73

Brands by name

Popular brands

Lenovo ThinkCentre M73, User Manual

Search results

Summary of Contents for ThinkCentre M73

Reviews:

Related manuals for ThinkCentre M73

Brands by name

Popular brands