Lenovo ThinkCentre M73 User Manual Download Page 49

Page: 49 / 162

2. Lift the computer to remove it from the vertical stand.

Figure 10. Removing the computer from the vertical stand

Installing or removing the VESA mount bracket

Attention:

Do not open your computer or attempt any repair before reading and understanding the “Important safety information”
on page v.

This section provides instructions on how to install or remove the VESA mount bracket.

Note:

The VESA mount bracket is only available on some models.

To install the VESA mount bracket, do the following:

1. Turn off the computer and disconnect all power cords from electrical outlets.

Chapter 5

Installing or replacing hardware

Summary of Contents for ThinkCentre M73



































































































































































Search results

Summary of Contents for ThinkCentre M73

Reviews:

Related manuals for ThinkCentre M73

Brands by name

Popular brands

Lenovo ThinkCentre M73, User Manual

Search results

Summary of Contents for ThinkCentre M73

Reviews:

Related manuals for ThinkCentre M73

Brands by name

Popular brands