manualshive.com logo in svg

Lenovo ThinkCentre M73, User Manual

Share
Download
Lenovo ThinkCentre M73 User Manual Download Page 131

Bluetooth problem

Symptom: Sound does not come from the Bluetooth headset or headphone but comes from the local
speaker even though the headset or headphone is connected using the Headset profile or AV profile.

Action: Do the following:

1. Exit the application that uses the sound device (for example, Windows Media Player).

2. Open Control Panel.

Note:

For detailed information on how to open Control Panel on Windows 8 and Windows 8.1, see

“Accessing Control Panel on the Windows 8 or Windows 8.1 operating system” on page 18.

3. Click

Hardware and Sound

➙

Sound

.

4. Select the

Playback

tab.

5. If you are using the Headset profile, select

Bluetooth Hands-free Audio

and click the

Set Default

button. If you are using the AV profile, select

Stereo Audio

and click the

Set Default

button.

6. Click

OK

to close the Sound window.

Note:

Bluetooth is supported only on some computer models.

Option problems

Use this information to diagnose problems with Lenovo hardware options that do not have their own
troubleshooting information.

Select your symptom from the following list:

•

“An option that was just installed does not work” on page 119

•

“An option that previously worked does not work now” on page 119

An option that was just installed does not work

Symptom: An option that was just installed does not work.

Action: Verify that:

• The option is designed for your computer.

• You followed the installation instructions supplied with the option and the installation instructions provided

with your computer, and all option files (such as device drivers, if required) are installed correctly.

• You have not loosened other installed options or cables.

• If the option is an adapter, you have provided enough hardware resources for the adapter to function

correctly. See the documentation supplied with the adapter (as well as the documentation for any other
installed adapters) to determine the resources required for each adapter.

If these actions do not correct the problem, run the Lenovo Solution Center program. If you need technical
assistance, see Chapter 11 “Getting information, help, and service” on page 125.

An option that previously worked does not work now

Symptom: An option that previously worked does not work now.

Actions:

• Verify that all option hardware and cable connections are secure.

• If the option comes with its own test instructions, use those instructions to test the option.

• If the failing option is a SCSI option, verify that:

Chapter 10

.

Troubleshooting and diagnostics

119

Summary of Contents for ThinkCentre M73



































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands