Lenovo ThinkCentre M73 User Manual Download Page 102 | Manualshive

Page: 102 / 162

background image

1. Move the pointer to the top-right or bottom-right corner of the screen to display the charms. Click

Settings

➙

Change PC settings

➙

General

.

2. In the

Advanced startup

section, click

Restart now

➙

Troubleshoot

➙

Advanced options

.

3. Restart your computer following the instructions on the screen.

• For Windows 8.1:

1. Move the pointer to the top-right or bottom-right corner of the screen to display the charms. Click

Settings

➙

Change PC settings

➙

Update and recovery

➙

Recovery

.

2. In the

Advanced startup

section, click

Restart now

➙

Troubleshoot

➙

Advanced options

.

3. Restart your computer following the instructions on the screen.

Recovering your operating system if Windows 8 or Windows 8.1 fails
to start

The Windows recovery environment on your computer is capable of operating independently from the
Windows 8 or Windows 8.1 operating system. This enables you to recover or repair the operating system
even if the Windows 8 or Windows 8.1 operating system fails to start.

After two consecutive failed boot attempts, the Windows recovery environment starts automatically. Then
you can choose repair and recovery options by following the instructions on the screen.

Note:

Ensure that your computer is connected to ac power during the recovery process.

For more details about the recovery solutions provided on computers preinstalled with the Windows 8
or Windows 8.1 operating system, refer to the help information system of the Windows 8 or Windows
8.1 operating system.

Recovery information for the Windows 10 operating system

To recover your Windows 10 operating system, use the following solutions:

• Use Windows recovery solutions.

– Use recovery solutions in Windows Settings.

1. Click the Start button to open the Start menu.

2. Click

Settings

➙

Update & security

➙

Recovery

.

3. Choose the appropriate recovery solution by following the instructions on the screen.

– Use System Restore to restore system files and settings to an earlier point.

1. Right-click the Start button to open the Start context menu.

2. Click

Control Panel

. View Control Panel using Large icons or Small icons, and then click

Recovery

➙

Open System Restore

.

3. Follow the instructions on the screen.

– Use the File History tool to restore your files from a backup.

Note:

If you use the File History tool to restore your files from a backup, ensure that you backed up

your data earlier with the tool.

1. Right-click the Start button to open the Start context menu.

2. Click

Control Panel

. View Control Panel using Large icons or Small icons, and then click

File

History

➙

Restore personal files

.

3. Follow the instructions on the screen.

– Use the Windows recovery environment by doing one of the following:

90

ThinkCentre M73 User Guide

«
...
100
101
102
103
104
...
»

Summary of Contents for ThinkCentre M73



































































































































































Reviews:

No comments

Related manuals for ThinkCentre M73

LS42 - BladeCenter - 7902

Brand: IBM Pages: 194

Brand: Quantum Pages: 14

CX PRINT SERVER 550

Brand: Xerox Pages: 166

SpycerNode 2U12

Brand: R&S Pages: 136

Brand: HPE Pages: 174

Eserver xSeries 360 Type 8686

Brand: IBM Pages: 74

OmniStor 4900F Series

Brand: Rackable Systems Pages: 196

Brand: W&T Pages: 228

Brand: Interface Masters Pages: 34

Brand: TerraMaster Pages: 13

Brand: SmartSight Pages: 113

FIDATA HFAS1-S10U

Brand: I-O DATA Pages: 46

Brand: Intermec Pages: 144

Brand: Intermec Pages: 452

Brand: Alcatel Pages: 2

Brand: Allnet Pages: 118

Brand: SAFARI Montage Pages: 8

Brand: SAFARI Montage Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands