Lenovo ThinkCentre M73 User Manual Download Page 130 | Manualshive

Page: 130 / 162

background image

Action: The network driver files may be corrupt or missing. Update the driver by referring to the “Solution”
description for the procedure to make sure that the correct device driver is installed.

The Wake on LAN feature is not working

Symptom: The Wake on LAN (WOL) feature is not working.

Actions:

• Make sure that WOL is enabled in the BIOS Setup Utility program.

• If it is, check with your LAN administrator for the necessary settings.

If your computer is a Gigabit Ethernet model and you use a speed of 1000 Mbps, the connection
fails or errors occur

Symptom: If your computer is a Gigabit Ethernet model and you use a speed of 1000 Mbps, the connection
fails or errors occur.

Actions:

• Use Category 5 wiring and make sure that the network cable is securely connected.

• Connect to a 1000 BASE-T hub/switch (not 1000 BASE-X).

If your computer is a Gigabit Ethernet model, it cannot connect to the network at 1000 Mbps. Instead,
it connects at 100 Mbps

Symptom: If your computer is a Gigabit Ethernet model, it cannot connect to the network at 1000 Mbps.
Instead, it connects at 100 Mbps.

Actions:

• Try another cable.

• Make sure that the link partner is set to auto-negotiate.

• Make sure that the switch is 802.3ab-compliant (gigabit over copper).

A wireless LAN problem

Symptom: You cannot connect using the built-in wireless networking card.

Actions:

• Make sure that your wireless LAN driver is the latest version. Check the Web site and verify the driver

version supported by Access Connections is the latest documented in the readme file.

• Make sure that your computer is within range of a wireless access point.

• Make sure that the wireless radio is enabled by double-clicking the Access Connections icon in the

Windows notification area.

• Check Network Name (SSID), and your encryption information. Use Access Connections to verify this

case-sensitive information.

A wireless WAN problem

Message: Unauthorized WAN card is plugged in - Power off and remove the WAN card.

Action: The wide area network (WAN) card is not supported on this computer. Remove it.

Note:

A wireless WAN card is supported only on some computer models.

118

ThinkCentre M73 User Guide

«
...
128
129
130
131
132
...
»

Summary of Contents for ThinkCentre M73



































































































































































Reviews:

No comments

Related manuals for ThinkCentre M73

ML-2010 - B/W Laser Printer

Brand: Samsung Pages: 25

Brand: NEC Pages: 151

Brand: SEH Pages: 20

Brand: LTS Pages: 5

Eserver xSeries 360 Type 8686

Brand: IBM Pages: 74

Brand: EXAGATE Pages: 8

Firepower Management Centers

Brand: Cisco Pages: 20

Brand: Cisco Pages: 34

MCS-7825-H1-IPC1

Brand: Cisco Pages: 54

Brand: Cisco Pages: 62

Brand: Cisco Pages: 10

KIN-UCSM5-1RU-K9

Brand: Cisco Pages: 22

Brand: Cisco Pages: 3

Cisco MeetingPlace Express

Brand: Cisco Pages: 20

Brand: Cisco Pages: 88

Brand: Cisco Pages: 14

Brand: Cisco Pages: 10

CSACS-1121 series

Brand: Cisco Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands