Lenovo Flex System Fabric CN4093, Application Manual

Page: 96 / 634

96
CN4093 Application Guide for N/OS 8.4
Re-enabling Locked Accounts
The administrator can re ‐ enable a locked account by reloading the switch or by
using the following command:
However, the above command cannot be used to re ‐ enable an account disabled by
the administrator.
To re ‐ enable all locked accounts, use the following command:
Listing Current Users
The
show access user
command displays defined user accounts and whether
or not each user is currently logged into the switch.
Logging In to an End User Account
Once an end user account is configured and enabled, the user can login to the
switch, using the username/password combination. The level of switch access is
determined by the Class of Service established for the end user account.
CN 4093(config)# access user strong-password clear local user lockout
username
<user name>
CN 4093(config)# access user strong-password clear local user lockout all
CN 4093# show access user
Usernames:
user - Enabled - offline
oper - Disabled - offline
admin - Always Enabled - online 1 session
Current User ID table:
1: name USERID , ena, cos admin , password valid, offline
2: name jane , ena, cos user , password valid, online
3: name john , ena, cos user , password valid, online