Lenovo Flex System Fabric CN4093, Application Manual

Page: 457 / 634

© Copyright Lenovo 2017 Chapter 29: Border Gateway Protocol
457
Incoming and Outgoing Route Maps
You can have two types of route maps: incoming and outgoing. A BGP peer router
can be configured to support up to eight route maps in the incoming route map list
and outgoing route map list.
If a route map is not configured in the incoming route map list, the router imports
all BGP updates. If a route map is configured in the incoming route map list, the
router ignores all unmatched incoming updates. If you set the action to
deny
, you
must add another route map to permit all unmatched updates.
Route maps in an outgoing route map list behave similar to route maps in an
incoming route map list. If a route map is not configured in the outgoing route
map list, all routes are advertised or permitted. If a route map in the outgoing route
map list is set to
permit
, matched routes are advertised and unmatched routes are
ignored.
Precedence
You can set a priority to a route map by specifying a precedence value with the
following commands:
The smaller the value the higher the precedence. If two route maps have the same
precedence value, the smaller number has higher precedence.
Configuration Example
To configure route maps, you need to do the following:
1.
Define network filter.
Enter a filter number from 1 to 256. Specify the IPv4 address and subnet mask of
the network that you want to match. Enable the network filter. You can distribute
up to 256 network filters among 32 route maps each containing eight access lists.
2.
(Optional) Define the criteria for the access list and enable it
.
Specify the access list and associate the network filter number configured in Step 1.
CN 4093(config)# route-map
<map number> (Select a route map)
CN 4093(config-route-map)# precedence
<1 ‐ 255> (Specify a precedence)
CN 4093(config-route-map)# exit
CN 4093(config)# ip match-address 1
<IPv4 address> <IPv4 subnet mask>
CN 4093(config)# ip match-address 1 enable
CN 4093(config)# route-map 1
CN 4093(config-route-map)# access-list 1 match-address 1
CN 4093(config-route-map)# access-list 1 metric
<metric value>
CN 4093(config-route-map)# access-list 1 action deny
CN 4093(config-route-map)# access-list 1 enable