-3-
HYDROCTROL-IOM-1903-E
INTRODUCTION
Safety codes & regulations
THE DISPLAY MUST BE INSTALLED IN ACCORDANCE WITH LOCAL SAFETY CODES AND REGULATIONS.
PLEASE READ CAREFULLY THE
MANUFACTURER’S INSTRUCTIONS BEFORE STARTING THIS DISPLAY.
Version concerned
The following manual is only valid for version higher or equal
to 11.7 of LennoxHydrocontrol display. In case of Chiller connected to
the LennoxHydrocontrol the version of Chiller control must be higher than Ch60 v2r3.3 or eCH v0r2.2
WARNING
- All the technical and technological information contained in this manual, including any drawing and technical descriptions
provided by us, remain the property of LENNOX and must not be utilised (except in operation of this product),reproduced, issued to or
made available to third parties without the prior written agreement of LENNOX. The technical information and specifications contained
in this manual are for reference only. The manufacturer reserves the right to modify these without warning and without obligation to
modify equipment already sold.
WARRANTY
The warranty of the display is subject to the warranty definitions as agreed upon in the order.
It is expected that the design and installation of the display utilises good working practices.
The warranty will be legally null and void if:
•
Modifications have been made to the equipment without prior written permission by LENNOX.
•
Settings and protections have been modified without prior written permission by LENNOX.
•
The equipment has not been installed and/or connected in accordance with the installation instructions.
•
The equipment is being used improperly, incorrectly, negligently or not in accordance with its nature and/or purpose.
In these circumstances LENNOX is indemnified from any product liability claims from third parties.
Abbreviations
The following abbreviations are used in this document
. HMI = LennoxHydrocontrol display
. FCU = FanCoil units
