-11-
HYDROCTROL-IOM-1903-E
OPERATING
− INPUTS: Display input values
Use it to see the current input values
•
UI1: Displays the UI1 value (Volt)
•
Disch Temp: Displays the discharge (supply) temperature
•
Return Temp: Displays the return temperature
•
Water Temp: Displays the water temperature
•
SP Offset UI2: Displays the set point offset input on UI2
•
Space Temp SI3: Displays the room temperature
•
DI4: Displays the DI4 status
•
DI5: Displays the DI5 status
•
DI6: Displays the DI6 status
•
Exit
− OUTPUTS: Equipment override
Use it to override the current controller outputs. Press both arrow buttons at the same time to
release an override)
•
CLG/CHG Valve: Override the water cooling valve position (only if cooling configured)
•
Heat Valve: Override the water heating valve position (only if heating configured)
•
Elec Heat: Override the electrical element (PWM)
•
Damper: Override the damper position
•
Exit
− GEN CFG: General Configuration
Use it to set the general configuration and the BACnet MS/TP address
•
Mac Address: Set the BACnet MS/TP address. (Unique from 10 to 32)
•
Subnet: Set the subnet parameter
•
Dev ID: Hardware version of the controller
•
Contrast: Set the contrast of the EC Smart View
•
Baud Rate: Set the BACnet MS/TP Baud Rate value
•
Exit
