-15-
HYDROCTROL-IOM-1903-E
OPERATING
enteliTOUCH setup:
You can set the device address (BACnet Ethernet),the device name, the volume, backlight time out. The photo gallery start is not
available until one USB drive with picture inside is not connected. The pictures are displayed according the following:
1)
Root directory
Alphanumeric order
2)
Folder directory
The folder are chosen using alphanumeric order
3)
Inside the folder
The pictures are displayed using alphanumeric order
You can download some graphic view (Only for Lennox technicians) using the web browser. If you access this screen directly with
the HMI the download is replaced by the Calibration.
To edit one screen click on modify (HMI view) and use the alphanumeric keypad to edit the field or drop the list and select the
correct field value.
Network Setup:
You can set the remote access from this screen. The modification is available only in the HMI screen. If you access this screen via a
browser you will not be able to modify the settings.
In case you have more than 1 HMI connected on your network remove the BACnet Ethernet flag. The BACnet /IP is not used and
has to be unchecked.
If the remote access flag is not checked the connection from a computer will not be allowed. In the HMI screen you will also be able
to modify the remote access port which is by default equal to 80.
Picture16: enteliTOUCH setup
Picture17: Network setup
