Leica VT1200, Instructions For Use Manual

Page: 57 / 64

57
Leica VT1200 / Leica VT1200 S
Ordering Information for Optional Accessories, Consumables and Spare Parts
9
9.1.7 Installing the magnifier support or microscope support
Fig. 46
1
2
3
• First, remove the cover (
→
Fig. 46- 1 ) from the basic instrument and store it in a safe place.
• Insert the provided Allen screws (
→
Fig. 46- 2 ) into the hole (
→
Fig. 46- 3 ) in the bearing bush. Use the
size 3 Allen key to screw the screws into the open slot on the top side of the basic instrument.
• Push the magnifier support or microscope support into the bearing bush as far as it will go.
Fig. 47
4
• Adjust the magnifier to the desired inclination angle and screw in the screw (
→
Fig. 47- 4 ) using the
size 3 Allen key, or
• Insert the S9E Stereozoom microscope into the ring holder and attach it by screwing it down
(
→
Fig. 48- 5 ) .
• Determine the desired inclination angle of the microscope and fix it in place by tightening the screw
(
→
Fig. 48- 6 ) clockwise using a size 3 Allen key.
• The microscope height can be adjusted using the setting dials for height adjustment (
→
Fig. 48- 7 ) and
adapted to the respective specimen.