32
Version 1.8, Revision L
Working with the Instrument
5
Key/setting dial
Semiautomatic sectioning mode
Automatic sectioning mode
Starts the sectioning process using
the selected amplitude (
AMPL
) and
blade feed rate (
SPEED
). Pressing
the
RUN/STOP
key a second time
stops the sectioning process
immediately.
Starts the sectioning process using
the selected section thickness
(
AUTO FEED
) amplitude (
AMPL
) and
the blade feed rate (
SPEED
). If single
stroke (
SINGLE
) is selected, only
one sectioning process is carried
out. If continuous stroke (
CONT
) is
selected, a continuous sectioning
process takes place. Pressing the
RUN/STOP
key a second time stops
the sectioning process that is in
progress. The blade moves to the
1st cutting window edge and stays
there.
The μm display is then reset to
0
.
The programmed section thickness
(
AUTO FEED
) appears in the
μm display continuously.
Not possible.
A sectioning process in progress
can be interrupted immediately
by pressing the
PAUSE
key and
restarted by pressing the
PAUSE
key
again. If
PAUSE
has been pressed
to interrupt a sectioning process,
pressing the
RUN/STOP
key or the
Blade forward
or
Blade back
keys
discontinues the sectioning process.
Press the
MENU
key.
ditto
1
2
8 sets of user parameters can be
saved;
Current user selection – User 1: turn
rotary knob 2 clockwise, then press
MENU
again.
